ARTICLE VII. SIGNS

Sec. 24.1-703. Permitted signs.

(a) The following table indicates the functional class, structural class, area, height, and type of illumination of signs permitted within each of the zoning districts prescribed by this chapter. All such signs shall be in accordance with the general provisions established in section 24-702.

SECTION 24.1-703. DISTRICT SIGN REGULATIONS

Functional Class

Zoning Districts Where Permitted

Structural Class

Illumination Type

Maximum Free-standing Sign Area

(sq. ft.)

Maximum Free-standing Sign Height

(ft.)

Maximum Cumulative Sign Area per lot or parcel exclusive of free standing sign

Free-standing

Marquee/

Canopy,

Projecting,

Wall

Roof

Monument

Pole

Internal

External

Monument

Pole

Monument

Pole

Identification

20 sq. ft.

NB,¹

WCI

1 sq. ft. per linear foot of principal bldg width

LB¹

1.25 sq. ft. per linear foot of principal bldg width

GB¹

1.5 sq. ft. per linear foot of principal bldg width

EO¹

N/A

1.5 sq. ft. per linear foot of principal bldg width

YVA

wall sign maximum of 5 s.f.; hanging sign maximum of 6 s.f.

Community Identification

RC, RR, R20, R13, R7

N/A

RMF

N/A

NB, LB, GB, EO, IL, IG, WCI

N/A

X = PERMITTED

¹See Section 24.1-706 for Shopping Center sign standards

b) The provisions of Section 24.1-702(a) notwithstanding, when a monument sign is designed with two identical faces arranged back-to-back or in a �V� with an interior angle of 45-degrees or less, only one sign face shall be counted toward the maximum area requirement.

(Ord. No. 03-42(R), 12/2/03)